
a closed conduit. The transducers are a non-contacting, clamp-on type, which will provide benefits of non-foulingoperation and easy installation.
transducers. The difference in the transit time measured is directly and exactly related to the velocity of the liquid in the pipe.
Technical Specification
Range | DN 15 to DN 6000 |
Sensors Range | A) DN 15 to DN 100; B) DN 50 to DN 700; C) DN 300 to DN 6000 |
Accuracy | 1% of reading at rates>0.6 ft/s |
Sensor | Cable 5 mtr. |
Display format | LCD with backlight,4x16 letters |
Totalizer | Three 7-digit totalizers for net, positive, and negative flows respectively |
Pipe Material | All metals, most plastics |
Liquid Types | Virtually all clean liquids and liquids with minor solids (<10,000ppm) |
Repeatability | 0.2% |
Response time | 0-999seconds, user-configurable |
Power supply | Ni-H Built-in batteries. 100V-240VAC for the charger |
| |
Rate Units | Meter, Feet, Cubic Meter, Liter, Cubic Feet, user-configurable |
Communication Interface | RS 232 C |
Temperature Range | Standard -30 to 90 C; High Temperature -30 to 160 C |
![]() |
NECTAR ENGINEERS
All Rights Reserved.(Terms of Use) Developed and Managed by Infocom Network Private Limited. |