Water Level Gauge

About Water Level Gauge

The Tubular Level indicator is the simplest form of Level indication. Used in low pressure, non-toxic services, Tubular level gauges detect and report the process fluid level through the direct reading of level in tanks or vessels. It consists of a Glass tube, Packing Material, end blocks, Vent plug, Drain valve, isolation valve, etc. End blocks have builtin isolating valve, drain valve and vent plug. Features The top & bottom liquid Chamber of indicator is made of solid bar & Glass Tube (Borosilicate) is fully Protected by Box Section made out of 2 mm thick M.S. channel supported at both ends, the tube Remains intact. 100% PTFE (TEFLON) rope as packing to ensure positive leak tightness for full vacuum as well as 6 Kg / Cm service pressure. It is available in single length of 2000 mm C/C Distance. We can extend the length by coupling 2 or more through coupler. We are providing Air Vent Plug at top & Drain plug at bottom for taking sample. We can also provide Inbuilt Isolation Valve on request. It is simple and reliable device for direct reading in atmospheric or pressurized (below 5 Kg/cm2) tank application. Glass Tube (Borosilicate Boiler Quality) is fully protected by guard Rods or Box Section made of 'C' Channel. Ofset Constructed Isolation Valve. The connection provided will be Flanged / Screwed / TC Joint / Union Specifications Connection End Fitting Protective Channel Glass Tube Packing Model No. Flanged ASA 150# / screwed /T.C joint CS/S.S.304/S.S 316/P.P C.S.Rectangle Channel C cut Powder Coated/ S.S.304/S.S 316/,P.P 19 mm OD Teflon Valve Pressure Raing Temperature Rating Temperature Range C.S./S.S.304/S.S. 316/P.P. Up to 5Kg/cm2 Up to 120 Deg. C Up to 120C 200 to 2000 mm of WC