
Technical Specification
Line Size |
DN 25 - DN 3000 mm |
Nominal Pressure |
0.6 - 1.6 Mpa (2.5Mpa/4.0Mpa/6.4Mp...Max 42Mpa) |
Accuracy |
+/-0.5%(Standard) |
Liner |
PTFE, Hard Rubber |
Electrode |
SS 316L, Hastelloy C, Tantalum |
Type |
Integral type, Remote type with 10 mtr. cable |
Medium Temperature |
-20+80 deg C (Integral type) |
Remote type (Hard Rubber) |
-10+80degC |
Remote type (PTFE) |
-10+160degC |
Ambient Humidity |
5-100%RH (relative humidity) |
Conductivity |
>15us/cm |
Protection Class |
IP65 (Standard); IP68 (Optional for remote type) |
Process Connection |
Flange (Standard), Wafer, Thread, Tri-clamp etc (Optional) |
Output Signal |
4-20mA (Standard) / Pulse (Optional) |
Communication |
RS485(Standard),GPRS/GSM (Optional) |
Power Supply |
Integral - 24 V DC , AC 220V Remote - 24 V DC (Standard) , SMPS AC 220V (Optional) |
Power Consumption |
<20W |
Main Performances of the Electrode Materials
Electrode Material |
Application |
SS 316L |
Applicable in Water, Sewage and Low corrosive medium |
Hastelloy C |
Be resistant to oxidable acid such as nitric acid, mixed acid as well as oxidable salt such as Fe+++,Cu++ and sea water |
Tantalum |
Having strong resistance to corrosive mediums that is similar with glass. Almost applicable in all chemicals mediums except for hydrofluoric acid, oleum and alkali |
Price:
![]() |
NECTAR ENGINEERS
All Rights Reserved.(Terms of Use) Developed and Managed by Infocom Network Private Limited. |